Is my ProScript device working? Models: SC-ST1400, SC-ST1475, SC-ST1500U, SC-ST1525, SC-ST1550, SC-ST1570, SC-ST1580

To verify that a ProScript device is functional complete the following steps:

1. Plug the device into a USB port on the computer.
2. Download and install Sign & Save from the Scriptel Support Downloads page.
3. Run “Sign and Save.”
4. In the lower left hand corner an icon will appear. A green icon indicates that the device is connected. A gray icon indicates that no device was found.
5. If a green icon is present, draw a signature on the device and check that the signature appears in the “Sign and Save” application.