ST1400 Methods | ![]() |
The ST1400 type exposes the following members.
Name | Description | |
---|---|---|
![]() | AddButtonSelectedEventListener |
Increments the IsRegisteredForButtonSelectedListener property and signals for button coordinates to start being stored in the buffer. Used for COM.
(Inherited from STSeriesDevice.) |
![]() | AddContainerSelectedEventListener |
Increments the IsRegisteredForContainerSelectedListener property and signals for container coordinates to start being stored in the buffer. Used for COM.
(Inherited from STSeriesDevice.) |
![]() | Close |
Closes the device to free up resources.
(Inherited from STSeriesDevice.) |
![]() | DownloadErrorCorrectionTable |
Intentionally not implemented.
(Inherited from STNullDevice.) |
![]() | DownloadErrorCorrectionTableFromString |
Downloads the error correction information specified
(Inherited from STSeriesDevice.) |
![]() | DownloadFirmware(Byte) | Downloads firmware to the device. The device needs to be reset upon completion of the download. Registering for FirmwareDownloadStatusEvent is suggested Unplugging the device while downloading firmware will damage it. |
![]() | DownloadFirmware(String) | Downloads firmware to the device. The device needs to be reset upon completion of the download. Registering for FirmwareDownloadStatusEvent is suggested Unplugging the device while downloading firmware will damage it. |
![]() | GetBoolButtonProperty |
Gets the boolean button property.
(Inherited from STSeriesDevice.) |
![]() | GetCalibrationState |
Gets the current calibration state
(Inherited from STSeriesDevice.) |
![]() | GetCoordinatePacket |
Gets the first coordinate from the coordinate buffer and removes that coordinate from the buffer. Used for COM.
(Inherited from STSeriesDevice.) |
![]() | GetCurrentDisplay |
Gets the current ISTSeriesDeviceDisplay from the ISTSeriesDevice.
(Inherited from STSeriesDevice.) |
![]() | GetDefaultRegions |
Gets the default regions.
(Inherited from STSeriesDevice.) |
![]() | GetDeviceSerialNumber |
Gets the serial number currently in the device
(Inherited from STSeriesDevice.) |
![]() | GetErrorCorrectionTable |
Intentionally not implemented.
(Inherited from STNullDevice.) |
![]() | GetNamedButtonRegionNumbers |
Gets the region numbers of the buttons containing the named text.
(Inherited from STSeriesDevice.) |
![]() | GetRegion | (Inherited from STSeriesDevice.) |
![]() | GetTextButtonProperty |
Gets the boolean button property.
(Inherited from STSeriesDevice.) |
![]() | Open |
Opens the device for use
(Inherited from STSeriesDevice.) |
![]() | RegisterForButtonSelectedEvent |
Registers a target event handler for the ButtonSelected event
(Inherited from STSeriesDevice.) |
![]() | RegisterForContainerSelectedEvent |
Registers a target event handler for the ContainerSelected event
(Inherited from STSeriesDevice.) |
![]() | RegisterForDeviceUnpluggedEvent |
Registers a target event handler for the DeviceUnplugged event
(Inherited from STSeriesDevice.) |
![]() | RegisterForFirmwareDownloadStatusEvent |
Registers a target event handler for the FirmwareDownloadStatus event
(Inherited from STSeriesDevice.) |
![]() | RemoveButtonSelectedEventListener |
Decrements the IsRegisteredForButtonSelectedListener property and if no one else is listening for button coordinates from the buffer then coordinates no longer are placed in the coordinate buffer. Used for COM.
(Inherited from STSeriesDevice.) |
![]() | RemoveContainerSelectedEventListener |
Decrements the IsRegisteredForContainerSelectedListener property and if no one else is listening for container coordinates from the buffer then coordinates no longer are placed in the coordinate buffer. Used for COM.
(Inherited from STSeriesDevice.) |
![]() | SetBoolButtonProperty |
Sets the button properties. Support for many of these operations are only available in firmware version
2.2.3 and later. Usage of the functions in earlier firmware can result in incorrect behavior.
(Inherited from STSeriesDevice.) |
![]() | SetDeviceSerialNumber |
Writes the serial number to the device.
(Inherited from STSeriesDevice.) |
![]() | SetRegionDimensions | (Inherited from STSeriesDevice.) |
![]() | SetTextButtonProperty |
Sets the button properties. Support for many of these operations are only available in firmware version
2.2.3 and later. Usage of the functions in earlier firmware can result in incorrect behavior.
(Inherited from STSeriesDevice.) |
![]() | StartCalibration |
Puts the device in calibration mode
(Inherited from STSeriesDevice.) |
![]() | StartCalibration(Int32) |
Puts the device in calibration mode
(Inherited from STSeriesDevice.) |
![]() | StartReading |
Starts reading coordinate information from the device
and sends the information via ButtonSelected and ContainerSelected events.
Uses the current run mode.
(Overrides STSeriesDeviceStartReading.) |
![]() | StartReading(STSeriesDeviceRunMode) |
Starts reading coordinate information from the device
and sends the information via ButtonSelected and ContainerSelected events.
Uses the selected run mode.
(Inherited from STSeriesDevice.) |
![]() | StartWorkflow |
Starts the given workflow on this device
(Inherited from STSeriesDevice.) |
![]() | StopCalibration |
Aborts calibration mode
(Inherited from STSeriesDevice.) |
![]() | StopReading |
Stops reading coordinate information from the device and keeps the current run mode
(Inherited from STSeriesDevice.) |
![]() | StopReading(STSeriesDeviceRunMode) |
Stops reading coordinate information from the device and changes the run mode to that specified
(Inherited from STSeriesDevice.) |
![]() | StopWorkflow |
Stops the current workflow if one exists
(Inherited from STSeriesDevice.) |
![]() | UnregisterForButtonSelectedEvent |
Unregisters a target event handler for the ButtonSelected event
(Inherited from STSeriesDevice.) |
![]() | UnregisterForContainerSelectedEvent |
Unregisters a target event handler for the ContainerSelected event
(Inherited from STSeriesDevice.) |
![]() | UnregisterForDeviceUnpluggedEvent |
Unregisters a target event handler for the DeviceUnplugged event
(Inherited from STSeriesDevice.) |
![]() | UnregisterForFirmwareDownloadStatusEvent |
Unregisters a target event handler for the FirmwareDownloadStatus event
(Inherited from STSeriesDevice.) |