Click or drag to resize
ST1525 MethodsScriptel Corporation
Warning: This API is deprecated, please consider using the new version located here: http://scriptel.com/developers/proscript/net-library/

The ST1525 type exposes the following members.

Methods
  NameDescription
Public methodAddButtonSelectedEventListener
Increments the IsRegisteredForButtonSelectedListener property and signals for button coordinates to start being stored in the buffer. Used for COM.
(Inherited from STSeriesDevice.)
Public methodAddContainerSelectedEventListener
Increments the IsRegisteredForContainerSelectedListener property and signals for container coordinates to start being stored in the buffer. Used for COM.
(Inherited from STSeriesDevice.)
Public methodClose
Closes the device to free up resources.
(Inherited from STSeriesDevice.)
Public methodDownloadErrorCorrectionTable
Intentionally not implemented.
(Inherited from STNullDevice.)
Public methodDownloadErrorCorrectionTableFromString
Downloads the error correction information specified
(Inherited from STSeriesDevice.)
Public methodDownloadFirmware(Byte)

Downloads firmware to the device. The device needs to be reset upon completion of the download.

Registering for FirmwareDownloadStatusEvent is suggested

Unplugging the device while downloading firmware will damage it.

(Inherited from STSeriesDevice.)
Public methodDownloadFirmware(String)

Downloads firmware to the device. The device needs to be reset upon completion of the download.

Registering for FirmwareDownloadStatusEvent is suggested

Unplugging the device while downloading firmware will damage it.

(Inherited from STSeriesDevice.)
Public methodGetBoolButtonProperty
Gets the boolean button property.
(Inherited from STSeriesDevice.)
Public methodGetCalibrationState
Gets the current calibration state
(Inherited from STSeriesDevice.)
Public methodGetCoordinatePacket
Gets the first coordinate from the coordinate buffer and removes that coordinate from the buffer. Used for COM.
(Inherited from STSeriesDevice.)
Public methodGetCurrentDisplay
Gets the current ISTSeriesDeviceDisplay from the ISTSeriesDevice.
(Inherited from STSeriesDevice.)
Public methodGetDefaultRegions
Gets the default regions.
(Inherited from STSeriesDevice.)
Public methodGetDeviceSerialNumber
Gets the serial number currently in the device
(Inherited from STSeriesDevice.)
Public methodGetErrorCorrectionTable
Intentionally not implemented.
(Inherited from STNullDevice.)
Public methodGetNamedButtonRegionNumbers
Gets the region numbers of the buttons containing the named text.
(Inherited from STSeriesDevice.)
Public methodGetRegion (Inherited from STSeriesDevice.)
Public methodGetTextButtonProperty
Gets the boolean button property.
(Inherited from STSeriesDevice.)
Public methodOpen
Opens the device for use
(Inherited from STSeriesDevice.)
Public methodRegisterForButtonSelectedEvent
Registers a target event handler for the ButtonSelected event
(Inherited from STSeriesDevice.)
Public methodRegisterForContainerSelectedEvent
Registers a target event handler for the ContainerSelected event
(Inherited from STSeriesDevice.)
Public methodRegisterForDeviceUnpluggedEvent
Registers a target event handler for the DeviceUnplugged event
(Inherited from STSeriesDevice.)
Public methodRegisterForFirmwareDownloadStatusEvent
Registers a target event handler for the FirmwareDownloadStatus event
(Inherited from STSeriesDevice.)
Public methodRemoveButtonSelectedEventListener
Decrements the IsRegisteredForButtonSelectedListener property and if no one else is listening for button coordinates from the buffer then coordinates no longer are placed in the coordinate buffer. Used for COM.
(Inherited from STSeriesDevice.)
Public methodRemoveContainerSelectedEventListener
Decrements the IsRegisteredForContainerSelectedListener property and if no one else is listening for container coordinates from the buffer then coordinates no longer are placed in the coordinate buffer. Used for COM.
(Inherited from STSeriesDevice.)
Public methodRenderImageAsBW
Renders the specified image onto the device. Supports BMP, GIF, JPEG, PNG, and TIFF.
(Inherited from ST15XX.)
Public methodRenderImageAsGray
Renders the specified image onto the device in 4 bit greyscale. Supports BMP, GIF, JPEG, PNG, and TIFF.
(Inherited from ST15XX.)
Public methodSetBoolButtonProperty
Sets the button properties. Support for many of these operations are only available in firmware version 2.2.3 and later. Usage of the functions in earlier firmware can result in incorrect behavior.
(Inherited from STSeriesDevice.)
Public methodSetDeviceSerialNumber
Writes the serial number to the device.
(Inherited from STSeriesDevice.)
Public methodSetRegionDimensions (Inherited from STSeriesDevice.)
Public methodSetTextButtonProperty
Sets the button properties. Support for many of these operations are only available in firmware version 2.2.3 and later. Usage of the functions in earlier firmware can result in incorrect behavior.
(Inherited from STSeriesDevice.)
Public methodStartCalibration
Puts the device in calibration mode
(Inherited from STSeriesDevice.)
Public methodStartCalibration(Int32)
Puts the device in calibration mode
(Inherited from STSeriesDevice.)
Public methodStartReading
Starts reading coordinate information from the device and sends the information via ButtonSelected and ContainerSelected events. Uses the current run mode.
(Inherited from ST1500U.)
Public methodStartReading(STSeriesDeviceRunMode)
Starts reading coordinate information from the device and sends the information via ButtonSelected and ContainerSelected events. Uses the selected run mode.
(Inherited from STSeriesDevice.)
Public methodStartWorkflow
Starts the given workflow on this device
(Inherited from STSeriesDevice.)
Public methodStopCalibration
Aborts calibration mode
(Inherited from STSeriesDevice.)
Public methodStopReading
Stops reading coordinate information from the device and keeps the current run mode
(Inherited from STSeriesDevice.)
Public methodStopReading(STSeriesDeviceRunMode)
Stops reading coordinate information from the device and changes the run mode to that specified
(Inherited from STSeriesDevice.)
Public methodStopWorkflow
Stops the current workflow if one exists
(Inherited from STSeriesDevice.)
Public methodUnregisterForButtonSelectedEvent
Unregisters a target event handler for the ButtonSelected event
(Inherited from STSeriesDevice.)
Public methodUnregisterForContainerSelectedEvent
Unregisters a target event handler for the ContainerSelected event
(Inherited from STSeriesDevice.)
Public methodUnregisterForDeviceUnpluggedEvent
Unregisters a target event handler for the DeviceUnplugged event
(Inherited from STSeriesDevice.)
Public methodUnregisterForFirmwareDownloadStatusEvent
Unregisters a target event handler for the FirmwareDownloadStatus event
(Inherited from STSeriesDevice.)
Top
See Also